Squeaky Clean With Up to 90% Less Alcohol
Reduce alcohol consumption by up to 90% when printing with Water-Washable Tough. Simply clean with Phrozen Washing Station and water, it's safer, less hassle, and friendlier to your wallet!
A Tougher Water-Washable*
While water-washable resin is known to be brittle, our Water-Washable Tough is formulated differently! With 2x toughness compared to most water-washable resins, it creates more durable models with a bit of flex*.
Improved Experience, Better Prints
Experience 3D printing the new way with less odor, less alcohol, and an easy-to-print formula. Plus, tougher models mean you don’t need to worry about accidental breakage during removal and handling.
Suitable for Various Applications
Whatever you set your mind to, Water-Washable Tough can do!
Small minis, medium figurines, or large statues, everything can be printed with Water-Washable Tough.
If ease of cleaning and alcohol saving are your priorities, you could never go wrong with this resin.
Water-Washable vs. Water-Washable Tough
*Water-Washable Tough resin is tougher than usual water-washable resin but not as tough as typical engineering tough resins.
If your models require higher strength and impact resistance, please check ourRPG Resinorengineering resins.
How to Post-Process Water-Washable Resin
As straightforward as it is, there are always some tips and tricks that will help you navigate your water-washable journey. Learn how to post-process your prints properly, how to handle the wastewater, and more!
1. Remove From Building Plate
2. Wash With Water
*Don't dump wastewater directly into the drain.
3. Dry and Cure
4. Completed
Cleaning
1. Remove models from the building plate.
2. Wash models in a Washing Station filled with water or 95% ethanol for 45–60 seconds. When washing with water, we recommend a final quick rinse with ethanol for cleaner results.
3. After cleaning, leave it to air dry for at least 30 minutes or use a compressed air gun.
*When printing flat on the building plate, remove the printed objects carefully to avoid deformation on the objects.
*If models are hollowed, make sure the inner parts are thoroughly.
*Do not soak models in solvent for more than 60 seconds to avoid surface damage.
Post-Curing
1. Post-cure the models in post-curing stations like Phrozen Cure or Phrozen Cure Mega S to post-cure the models for 30 minutes for the best results.
